PP Melt Blown Filter Cartridge pinhole series
PP melt blow filter cartridge is fusing and intertwined of polypropylene resin without any chemicales.The cartridges are glued at random to form 3D micro pore which will make the cartridge 3 layers with fine fibers in surface and coarse fibers and deep filtration. As the fiber and density form high filtration rating and pollutants holding capacity on diameter of filter cartridge, low pressure drop, gradual changing deep filtration structure with loose outside and close inner, strong pollutants holding capacity, it can remove contaminant effectively, such as suspended substance, particulate and rust, providing efficient filtration and long service life.
Brand: sanbeafilter
Material: Polypropylene
Precision: 0.5mciron_100micron
Certification: ROHS,ISO9001
Delivery Time: 3days
Product characteristics
● Formed by thermal bond without using any binders andadhesives.
● 100% Pure Polypropylene will not cause any pollution towater.
● Wide Chemical compatibility.
● All kinds of adaptors are available.
● FDA compliance material.
Feature
APPLICATION
product specification
| DIMENSION | [ OD ]: 63mm-115mm [ I D ]: 28mm ,30mm |
| [Length]:9.75",9.87",10",20",30",40",50",60" | |
| MATERIAL OF CONSTRUCTIONS |
[ Media ]: Polypropylene(PP) [ End cap ]: Polypropylene(PP) |
| PERFORMANCE |
[Gasket ]: Silicone, EPDM, NBR, Viton [ Core ]: Polypropylene(PP) |
| [ Max. Operating temperature ]: 60°C [ Max. Operating DP ]: 2.0Bar @ 25° |
ordering information
| OUTER DIAMETER | REMOVAL RATING | LENGTH(INCH) | END CAP TYPE | SEAL MATERIAL |
| 60=60mm | 1=1um | 10=10" | F= DOE | S= SiliconeBlank = No Core |
| 63=63mm(2.5") | 3=3um | 20=20" | M =222/Flat | E = EPDM |
| 110=110mm | 5= 5um | 30=30" | P=222/Fin | C= PP Core |
| 115=115mm(4.5") | 10=10um | 40=40" | T=226/Flat | T=226/Flat |
| 20=20um | 50=50” | Q=226/Fin | V = Viton | |
| 60=60" |
No. 18, Houjie Section, Houda Road, Houjie Town, Dongguan City, Guangdong, China
Brand name recognition sets sanbea apart in the competitive market.